Rulers help you accurately place and measure objects in the illustration window or in an artboard. The point where 0 appears on each ruler is called the ruler origin. Illustrator provides separate rulers for documents and artboards. You can select only one of these rulers at a time. Global rulers appear at the top and left sides of the illustration window. The default ruler origin is located at the top-left corner of the illustration window. Artboard rulers appear at the top and left sides of the active artboard.

The default artboard ruler origin is located at the top-left corner of the artboard. The difference between artboard rulers and global rulers is that if you select artboard rulers, the origin point changes based on the active artboard. In addition, you can have different origin points for artboard rulers. Now, if you change the artboard ruler origin, the pattern fills in objects on the artboards are not affected. The default origin point for the global ruler is at the upper-left corner of the first artboard and the default origin for the artboard rulers is at the top left corner of the respective artboard.

Artboard rulers appear by default, so the Change to Global Rulers option appears in the Rulers sub-menu. To change the ruler origin, move the pointer to the upper-left corner where the rulers intersect, and drag the pointer to where you want the new ruler origin. As you drag, a cross hair in the window and in the rulers indicates the changing global ruler origin.

To restore the default ruler origin, double-click the upper-left corner where the rulers intersect. The coordinate system has now been switched to fourth quadrant, which was previously the first quadrant.

In Illustrator CS5, when you move downwards, the value of y-axis increases and if you move toward right, the value of x-axis increases. For saving to legacy versions of Illustrator, the Global rulers remain at the position set in legacy document.

Although, the origin point does not move to upper left, the coordinate system changes to fourth quadrant. The change in coordinate system and the ruler origin does not apply to scripting, which allows you to retain old scripts. However, when you transform objects using scripting, the Y coordinate values differ from the values that you set in the Illustrator user interface. The default unit of measurement in Illustrator is points a point equals. You can change the unit that Illustrator uses for general measurements, strokes, and type.

You can override the default unit while entering values in boxes. Note : The General measurement option affects rulers, measuring the distance between points, moving and transforming objects, setting grid and guides spacing, and creating shapes.

Tip : When mixing picas and points, you can enter values as XpY, where X and Y are the number of picas and points for example, 12p6 for 12 picas, 6 points.

Guides help you align text and graphic objects. You can create ruler guides straight vertical or horizontal lines and guide objects vector objects that you convert to guides.

Like the grid, guides do not print. You can choose between two guide styles—dots and lines—and you can change the color of guides by using either predefined guide colors or colors you select using a color picker. By default, guides are unlocked so that you can move, modify, delete, or revert them, but you can choose to lock them into place. To restrict the guides to an artboard instead of the entire canvas, select the Artboard tool and drag the guides on to the artboard.

When snapping to a point, the snapping alignment depends on the position of the pointer, not the edges of the dragged object. When the pointer comes within 2 pixels of an anchor point or guide, it snaps to the point. When a snap occurs, the pointer changes from a filled arrowhead to a hollow arrowhead. They help you align, edit, and transform objects or artboards relative to other objects, artboards, or both by snap-aligning and displaying X, Y location, and delta values.

You can specify the type of smart guides and feedback that appear such as measurement labels, object highlighting, or labels by setting the Smart Guides preferences. When you create an object with the pen or shape tools, use the Smart Guides to position a new object’s anchor points relative to an existing object.

Or, when you create a new artboard, use Smart Guides to position it relative to another artboard or an object. Specify these angles in the Smart Guides preferences. When you move an object or artboard, use the Smart Guides to align the selected object or artboard to other objects or artboards.

The alignment is based on the geometry of objects and artboards. Guides appear as the object approaches the edge or center point of other objects. You can change when and how Smart Guides appear by setting Smart Guides preferences. Alignment Guides. Displays guide lines that are generated along the center and edges of geometric objects, artboard, and bleeds. They are generated when you move objects and when you perform operations such as drawing basic shapes, using the Pen tool, and transforming objects.

Measurement Labels. Displays information for many tools such as Drawing tools and Text tools about the position of the cursor as you position the cursor over an anchor point.

When you press Shift with a drawing tool selected, the starting location appears. Object Highlighting. Highlights the object below the pointer as you drag around it. Transform Tools. Construction Guides. Displays guidelines as you draw new objects. You specify the angles at which you want guidelines drawn from the anchor points of a nearby object.

You can set up to six angles. The preview reflects your settings. Snapping Tolerance. Specifies the number of points the pointer must be from another object for Smart Guides to take effect.

Use the Measure tool to calculate the distance between any two points and display the results in the Info panel. Select the Measure tool. Select and hold the Eyedropper tool to see it in the Tools panel. Click the first point and drag to the second point. The Info panel displays the horizontal and vertical distances from the x and y axes, the absolute horizontal and vertical distances, the total distances, and the angle measured.

The values for width and height are affected by the Use Preview Bounds option in the General preferences. When you use the Pen tool or Gradient tool, or when you move a selection, the Info panel displays the change in x W , the change in y H , the distance D , and the angle as you drag. When you use the Zoom tool, the Info panel displays the magnification factor and the x and y coordinates after you release the mouse button. When you use the Scale tool, the Info panel displays the percentage change in width W and height H and the new width W and height H after the scaling is complete.

When you use the Paintbrush tool, the Info panel displays the x and y coordinates and the name of the current brush. Select Show Options from the panel menu or click the double arrow on the panel tab to display values for the fill and stroke colors of the selected object and the name of any pattern, gradient, or tint applied to the selected object.

Note : If you select multiple objects, the Info panel displays only the information that is the same for all selected objects. Legal Notices Online Privacy Policy. Adobe Illustrator Features What’s New. Buy now.

User Guide Cancel. Use rulers. Note : Changing the global ruler origin affects the tiling of patterns. Change the unit of measurement. If Show Asian Options is selected in the Type preferences, you can also select a unit specifically for Asian type. To change the unit of measurement when entering a value in a box, follow the value by any of the following abbreviations: inch, inches, in, millimeters, millimetres, mm, Qs one Q equals 0. Use the grid. The grid appears behind your artwork in the illustration window.

It does not print. Use guides. Create guides. Position the pointer on the left ruler for a vertical guide or on the top ruler for a horizontal guide. Drag the guide into position. To make working with multiple guides easier, move them into a separate layer. Move, delete, or release guides. Do any of the following:. To move the guide, drag it or copy it. Snap objects to anchor points and guides. Select the object you want to move, and position the pointer on the exact point you want to align with anchor points and guides.

Drag the object to the desired location. Use Smart Guides. Smart Guides are on by default. Use Smart Guides in the following ways:.

Adobe illustrator cs5 system requirements pc free.Adobe Creative Suite

 
System requirements Before startingthe lessons inthe AdobeInDesign CS5 DigitalClassroom, make sure thatyour computer is equipped for running Adobe InDesign. No Longer Available. Share. Print ; System Requirements, Windows: Intel Pentium 4 or AMD Athlon 64 processor. Microsoft Windows XP with Service Pack 3; Windows. To use the GPU performance features: Your Mac should have a minimum of MB of VRAM (2 GB recommended), and your computer must support OpenGL version or.

Adobe illustrator cs5 system requirements pc free

This also has some overhead. The graphics environment software of Adobe Illustrator loads the entire file into memory rather than just reading it from disk, thus more RAM memory is required. This is due to the memory management.

MAPublisher reserves a fairly large amount of memory for each import-action, which is not properly returned when the import is done or even when it is cancelled. The solution is simple: save your file, close it and open it again. By closing the file, the reserved memory is properly returned.

Buy now. System requirements Older versions of Illustrator Search. Adobe Illustrator User Guide. Select an article: Select an article:. Illustrator CS6 system requirements. Broadband Internet connection and registration are required for software activation, validation of subscriptions, and access to online services.

The application can be reopened to resolve this issue. The Adobe Illustrator CS5 design tool is used to design websites, brochures, business cards, fliers, and other print and screen designs. There will be a lot of digging to do. There is no limit to what level one can learn. The CC version is a cloud-based subscription using new technologies, while the CS6 is a non-subscription version of old technology that is perpetual. Sign in and install using the instructions onscreen.

You will also need to install the Creative Cloud desktop app if you are installing a Creative Cloud app for the first time. Photoshop can still be downloaded and run locally on Windows 7 computers even though Adobe switched to a Cloud-based subscription service in May In the past, you could purchase the software outright, but now you have to pay a monthly or yearly fee to keep it active.

You may experience slow performance if you run it on your system. As a result, using a portion of the hard disk as virtual memory can result in slower performance. Adobe recommends installing more RAM if you need more memory to work with Illustrator.

Illustrator uses the system drive as its primary scratch disk by default. Adobe Acrobat will continue to support bit Windows OS in the next major update. A bit computer can store up to 3GB of memory, while a bit computer can store up to 4GB of memory.

Data can be processed more accurately and in larger chunks with more bits. With more bits, our system can point to or address a larger number of physical locations. When Photoshop runs on the bit version, it is able to access more RAM than it can on the bit version.